Fire Resistant Gypsum Ceiling Panels

  • Gypsum lay-in ceiling panels are tiles which can be employed in kitchens or food processing areas, storage areas, warehouses, utility rooms or some other interior or soffit ceilings that are economical and attractive instead of acoustical in performance. They're based on suspended ceiling grids.


    These gypsum panels are durable and provide cleanliness on the food processing areas. They're usually vinyl laminated to seal out dirt, moisture and odors. The vinyl surfaces are embossed and are exceptionally stain resistant. They can also withstand repeated washings. Lighting efficiency is maximized simply because they have exceedingly reflective surfaces.

    With all the laminated vinyl finish, there is absolutely no more need for additional finishing. You can definitely a client so desires, it is recommended use two coats of alkyd or semi-shiny latex enamel. Also, an oil primer can be used then coated with oil paint or flat latex. Flat oil paint, two coats, doubles.

    The vinyl gypsum ceiling panels are also approved by the Department of Agriculture of the us of America. The panels are cut easily which enable it to fit into standard suspended ceiling grids. They may be easily washable. Lightly rubbing the surface with damp sponge or cloth using soap or detergent will remove dirt and marks. Strong organic solvent cleaners and steel wool are certainly not recommended to use in cleaning the boards.

    Detergents, 5% Nitric Acid, 10% Ammonia, Ethanol, Oleic Acid, Bleach, 10% Hydrochloric Acid, Carbon Tetrachloride, Peroxide, and Port Wine can have no impact on the gypsum panel even though these chemicals encounter the panels all day and night. They may be easily washed with water and soap. 10% Citric Acid, Ketchup, 10% Sodium Hydroxide, Fresh lemon juice, Coffee, Mayonnaise, Tea, Cooking oil, Milk, Trisodium Phosphate, Crayon, Mustard, and Vinegar may also have no effect on the gypsum board even when confronted with these chemicals for 24 hours. Pencil marks leaves a really light stain though. Acetone exposure every day and night then washed with soap and water can give the panels a shiny finish.

    Gypsum lay-in ceiling panels mustn't be employed in areas which can be directly encountered with water. They ought to also 't be used in private pools, shower dressing rooms as well as in areas with high humidity or moisture. Backload must be limited by 0.5 pounds per square foot. Enclosed or unheated spaces higher than the ceiling panels must be properly ventilated. Retainers or hold down clips has to be provided in installations where sudden wind or air pressure change may uplift the panels. Don't use anything but an approved suspended system for exterior use when being installed outdoors.

    The gypsum boards are available in 1/2" and 5/8" thick type X fire rated. A type X fire rating implies that the board has a minimum fire rating of a single hour, the element most building codes. It's more fireresistant plus more expensive compared to standard boards. Fire rated boards usually are necessary in living room areas as well as in such areas which are susceptible to fires.
    For additional information about keo dan gach check out this popular website: click now

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!